Zeiss HUMPHREY 720i User Manual - page 66
3-16
SETTING-UP TESTS
REV. B 02/03 PN 51680-1
HUMPHREY FIELD ANALYZER II -
i
series
5
Enter up to 14 charac-
ters from the pop-up
keyboard, then ENTER.
6
Repeat Steps 4-5 for the other eye.
Inputting pupil diameter and
1
From the Patient Data 2 screen, choose PUPIL DIAMETER.
visual acuity
2
Enter up to 4
characters (0-14.5;
decimal point counts as one
character) from the pop-up
keypad, then ENTER.
3
Repeat Steps 1-2 for the other eye. The pupil diameter value will also appear on the
printout.
Note: If the Autopupil feature (model 750i only) is being used, you need not enter a pupil
diameter. The automatic pupil measurement will be entered and noted with an asterisk (*)
on the Patient Data 2 screen. Gaze Tracking must be initialized for Autopupil to work.
4
From the Patient Data 2 screen, choose VISUAL ACUITY.
3.htp
3/14/03, 3:07 PM
16