Can-Am 2009 Renegade 500 Operator's Manual - Throttle Cable
MAINTENANCE PROCEDURES
The oil should be level with the bottom
of the oil level hole. Refill as required
until gearbox oil level flows through oil
level hole.
Reinstall oil level plug.
Throttle Cable
Throttle Cable Lubrication
The throttle cable must be lubricated
with silicone lubricant (P/N 293 600
041) or an equivalent.
WARNING
Always use a silicone-based lubri-
cant. Using another lubricant (like
a water-based lubricant) could
cause the throttle lever/cable to
become sticky and stiff.
Open the throttle lever housing.
V07I0FY
1
1. Remove these screws
Separate the housing. Slide rubber
protector back to expose throttle cable
adjuster.
4
V07I0GY
3
2
1
1. Cable protector
2. Throttle cable adjuster
3. Lock nut
4. Throttle lever housing
Screw in the throttle cable adjuster.
Remove inner housing protector.
V07I0HY
1
1. Inner housing protector
Remove the cable from the throttle
lever housing.
NOTE: Slide cable in clip slot and re-
move the end of cable from clip.
_______________
99