Can-Am 2009 Renegade 500 Operator's Manual - Drive Shaft Boot/protector
MAINTENANCE PROCEDURES
vmo2008-005-008_a
TYPICAL
1. Adjustment screws
Taillight Bulb Replacement
Unscrew lens screws to expose bulbs.
vmo2007-015-010_b
1. Lens
2. Screws
Push the bulb in and hold while turning
counterclockwise to release.
Install the new bulb by pushing in while
turning clockwise.
Drive Shaft Boot/Protector
Drive Shaft Boot/Protector
Inspection
Visually inspect drive shaft protectors
and boots conditions. Check protec-
tors for damage or rubbing against
shafts. Check boots for cracks, tears,
leaking grease etc. Repair or replace
damaged parts as necessary.
vmo2007-015-013_a
FRONT OF VEHICLE
1. Drive shaft protector
2. Drive shaft boots
1
V07H02Y
1
2
2
TYPICAL — REAR OF VEHICLE
1. Drive shaft protector
2. Drive shaft boots
Wheel and Tires
Wheel Bearing Inspection
Push and pull the wheels from the up-
per edge to feel the play. See an autho-
rized Can-Am dealer if there is any play.
______________
105