Can-Am 2009 Renegade 500 Operator's Manual - Warning
MAINTENANCE PROCEDURES
vmo2009-008-035
CLAMP PRE-INSTALLATION
3. Insert foam with clamp on CVT air
inlet as per the following illustra-
tion.
4. Ensure that the clamp is properly
positioned on the air inlet edge and
clamp nut is positioned upwards.
5. Tighten clamp completely.
vmo2009-008-036_a
CVT AIR INLET REMOVED FOR CLARITY
PURPOSE
1. Foam
2. Clamp nut
3. CVT air inlet
6. Install filter elastic around clamp.
vmo2009-008-037_a
CVT AIR INLET REMOVED FOR CLARITY
PURPOSE
1. Filter elastic
2. Clamp
The following illustration shows the fi-
nal assembly.
vmo2009-008-038
CVT AIR INLET REMOVED FOR CLARITY
PURPOSE
7. Install CVT access cover using plas-
tic darts.
8. Install central panel.
9. Install seat.
While reading this Operator’s Guide, reminder that:
WARNING
Indicates a potential hazard that, if not avoided, could result in serious
injury or death.
_______________
97