Can-Am 2009 Renegade 500 Operator's Manual - 7) Multifunction Switch
CONTROLS/INSTRUMENTS/EQUIPMENTS
H: High gear
This selects the high speed range of
the transmission in the gear box. It is
the normal driving speed range. It al-
lows the vehicle to reach its maximum
speed.
L: Low gear
This selects the low speed range of the
transmission in the gear box. It is the
working position. It allows the vehi-
cle to move slowly with the maximum
traction and power.
NOTE: Use the low speed range to pull
any load or to climb a steep incline.
7) Multifunction Switch
The controls located on this multifunc-
tion switch are:
1
3
2
4
vmo2007-015-009_a
TYPICAL — MULTIFUNCTION SWITCH
1. Headlights switch
2. Engine stop switch
3. Engine start button
4. Override button
Headlights Switch
1
V07I03Y
3 2
HEADLIGHTS SWITCH FUNCTIONS
1. Headlights switch
2. Low beam and taillight
3. High beam and taillight
NOTE: Place ignition switch to ON
“without light” position to close the
headlights.
vmo2007-015-008_a
IGNITION SWITCH POSITIONS
1. OFF
2. ON “with light”
3. ON “without light”
64
______________