Can-Am 2009 Renegade 500 Operator's Manual - Warning
MAINTENANCE PROCEDURES
Cooling system must be filled with
BRP premixed coolant (P/N 219 700
362) or with distilled water and an-
tifreeze solution (50% distilled water,
50% antifreeze).
Engine Coolant Replacement
WARNING
In order to avoid potential burns,
do not remove the radiator cap or
loosen the coolant drain plug if the
engine is hot.
Open the front access panel and re-
move the radiator cap.
vmo2008-014-002_e
1. Radiator cap
Unscrew the coolant drain plug and
drain the coolant into a suitable con-
tainer.
vmo2006-007-021_a
1. Coolant drain plug
2. Brake pedal
NOTE: Do not unscrew the coolant
drain plug completely.
Remove the RH side panel.
Unscrew the bleeding screw on the
top of thermostat housing.
vmo2006-007-022_a
1. Bleeding screw
Drain the system completely and rein-
stall the coolant drain plug.
Pinch hose between radiator and ther-
mostat housing with a large hose
pincher (P/N 529 032 500) or an equiv-
alent.
NOTICE
Do not use vise-grip pliers
to pinch hose.
94
______________