Can-Am 2009 Renegade 500 Operator's Manual - Cvt Air Filter
MAINTENANCE PROCEDURES
CVT Air Filter
800R EFI Only
CVT Air Filter Removal
1. Remove seat and central panel.
Refer to
BODY
section.
2. Locate access cover on LH side of
vehicle underneath front fender.
3. Remove plastic darts that hold ac-
cess cover.
4. Remove access cover.
vsi2008-023-001_a
ACCESS COVER
1. Plastic darts
5. Locate CVT filter.
vmo2009-008-031_a
1. CVT filter
6. Stretch CVT filter elastic.
7. Remove CVT filter by pulling it out-
ward.
vmo2009-008-032_a
CVT AIR INLET REMOVED FOR CLARITY
PURPOSE
1. CVT filter elastic
2. CVT filter
3. CVT air inlet
8. Unscrew foam clamp.
9. Remove foam with clamp.
CVT Air Filter Cleaning
1. Pour cleaning solution (P/N 219 700
341) or an equivalent into a bucket.
2. Put filter and foam in to soak.
3. While filter and foam soak, clean in-
side the CVT air inlet end.
4. Rinse filter and foam with warm
water until all cleaning solution dis-
appears.
5. Let filter and foam dry completely.
vmo2009-008-034_a
1. CVT filter
2. Foam
CVT Air Filter Installation
1. Unscrew clamp completely.
2. Pre-install clamp on foam.
96
______________