Can-Am 2009 Renegade 500 Operator's Manual - page 79
TUNE YOUR RIDE
vmo2008-021-001_a
TYPICAL — FRONT PRELOAD ADJUSTMENT
A. Same length
vmo2008-021-002_a
TYPICAL — REAR PRELOAD ADJUSTMENT
A. Same length
Shock Damping Strength
Adjustment
Renegade 800 X
Perform adjustments one position
(click) at a time. Test run the vehicle un-
der the same conditions; trail, speed,
driver riding position, etc. Proceed me-
thodically until you are satisfied.
Compression (Low Speed)
Use a flat screwdriver to adjust it.
vmo2008-021-004_a
TYPICAL
1. Compression adjuster (flat screwdriver)
Turning it clockwise (H) increases
shock damping action (stiffer).
Turning it counterclockwise (S) de-
creases shock damping action (softer).
Compression (High Speed)
Use a 17 mm wrench to adjust it.
vmo2008-021-004_b
TYPICAL
1. High speed compression adjuster
Turning it clockwise (H) increases
shock damping action (stiffer).
Turning it counterclockwise (S) de-
creases shock damping action (softer).
Rebound
Use a flat screwdriver to adjust it.
_______________
77