Can-Am 2009 Renegade 500 Operator's Manual - Warning
MAINTENANCE PROCEDURES
V07I0IY
Remove the throttle body side cover.
vmo2006-007-032_a
1. Throttle body
2. Side cover screws
Insert the needle of the lubricant can in
the end of the throttle cable adjuster.
WARNING
Always wear eye protection and
gloves when you lubricate a cable.
V07I0JY
TYPICAL
NOTE: Place a rag around the throttle
cable adjuster to prevent the lubricant
from splashing.
Add lubricant until it runs out at throttle
body end of the throttle cable.
Reinstall and adjust the cable.
Throttle Lever
Throttle Lever Adjustment
Slide rubber protector back to expose
throttle cable adjuster.
Loosen lock nut then turn the adjuster
to obtain correct throttle lever free play.
NOTE: Measure throttle free play at
the tip of throttle lever.
Tighten lock nut and reinstall protector.
100
______________