D-Link DES-2110 User manual - Snmp Commands
95
SNMP Commands
The SNMP commands in the Command Line Interface (CLI) are
listed (along with the appropriate parameters) in the following table.
Command Parameters
create snmp
community
read_write]
delete snmp
community
read_write]
show snmp
create snmp host
trap_community
delete snmp host
[
show snmp host
enable snmp traps
disable snmp traps
Each command is listed, in detail, in the following sections.
create snmp community
Purpose
Used to create an SNMP community string to
define the relationship between the SNMP
manager and an agent. The community string
acts like a password to permit access to the
agent on the Switch. One or more of the following
characteristics can be associated with the
community string.
Syntax
create snmp community
20> [read_only | read_write]