D-Link DES-2110 User manual - Logout
Manual is about: 8-port 10/100 + 1-port 1000Base-T Copper
+ 1-port miniGBIC Gigabit Switch
of
126
Example usage:
To restore all of the Switch’s parameters to their default values:
Figure 55. reset command
logout
Purpose
Used to log out a user from the Switch’s console.
Syntax logout
Description
This command terminates the current session on
the Switch’s console.
Parameters
None.
Example usage:
To terminate the current telnet console session:
Figure 56. logout command
64