D-Link DES-2110 User manual - Trap Commands
Manual is about: 8-port 10/100 + 1-port 1000Base-T Copper
+ 1-port miniGBIC Gigabit Switch
of
126
Example usage:
To display port mirroring configuration:
Figure 77. show mirror command
Trap Commands
The trap mirroring commands in the Command Line Interface (CLI)
are listed (along with the appropriate parameters) in the following
table.
Command
Parameters
config discovery
trap_ip
ipaddress
config discovery
trap_event
{[bootup | illegal_login | t_rx_err |
t_tx_err| f_rx_err | f_tx_err|
f_link_change]}
delete discovery
trap_event
{[bootup | illegal_login | t_rx_err |
t_tx_err| f_rx_err | f_tx_err|
f_link_change]}
show discovery trap
82