D-Link DES-2110 User manual - Port Mirroring Commands
Manual is about: 8-port 10/100 + 1-port 1000Base-T Copper
+ 1-port miniGBIC Gigabit Switch
of
126
VLAN ID to the specified ports.
priority <0~7> - To configure the priority to the
specified PVID.
Example usage:
To configure the 802.1Q Port VLAN_ID:
Figure 74. config pvid command
Port Mirroring Commands
The port mirroring commands in the Command Line Interface (CLI)
are listed (along with the appropriate parameters) in the following
table.
Command
Parameters
config mirror port
[enable | disable] {
ports
show mirror
show mirror
79