D-Link DES-2110 User manual - Configure Snmp Trap:
Manual is about: 8-port 10/100 + 1-port 1000Base-T Copper
+ 1-port miniGBIC Gigabit Switch
of
126
Modify Group: To modify previously defined SNMP Community
group, click on the ID parameter to enter to the selected SNMP
Community Group to configure its community name and community
enable. Press “Apply” to save change of the SNMP Community
Group.
Figure 30. Modify SNMP Community group
Configure SNMP Trap:
Figure 31. Configure SNMP Trap Setting
Trap authentication fail: When checked the dialog box ofthe Trap
authentication fail, when fail to authentication, the Switch will trap
the authentication fail even to the SNMP host.
43