D-Link DES-2110 User manual - Config Discovery Trap_Ip
Manual is about: 8-port 10/100 + 1-port 1000Base-T Copper
+ 1-port miniGBIC Gigabit Switch
of
126
Each command is listed, in detail, in the following sections.
config discovery trap_ip
Purpose
Used to configure an IP address of the trap
recipient of Web Management Utility to the
Switch.
Syntax
config discovery trap_ip ipaddress
Description
The command is configure an IP address of the
trap recipient of Web Management Utility to the
Switch.
Parameters
Management Utility.
Management Utility. The range is between 1 to
4094.
Example usage:
To assigned IP address of the Web Configuration Utility to receive
trap message:
Figure 78. config discovery trap_ip command
83