D-Link DES-2110 User manual - Show Snmp Community
Manual is about: 8-port 10/100 + 1-port 1000Base-T Copper
+ 1-port miniGBIC Gigabit Switch
of
126
97
Example usage:
To delete the SNMP community string “admin”:
Figure 89. delete snmp community command
show snmp community
delete snmp community
Purpose
Used to remove a specific SNMP community
string from the Switch.
Syntax
delete snmp community
20> [ read_only | read_write ]
Description
This command is used to remove a previously
defined SNMP community string from the Switch.
Parameters
previously created SNMP community to be
delete.
read_only - Specifies which previously created
SNMP community of read_only to be delete.
read_write - Specifies which previously created
SNMP community of read_write to be delete.