D-Link DES-2110 User manual - Show Discovery Trap
Manual is about: 8-port 10/100 + 1-port 1000Base-T Copper
+ 1-port miniGBIC Gigabit Switch
of
126
87
show discovery trap
Purpose
Used to show the configuration of the discovery
trap on the Switch.
Syntax
show discovery trap
Description
The command is display the configuration of the
discovery trap on the Switch..
Parameters
None.
Example usage:
To display discovery trap configuration:
Figure 81. show discovery trap command
Spanning Tree Commands
The spanning tree commands in the Command Line Interface (CLI)
are listed (along with the appropriate parameters) in the following
table.