D-Link DES-2110 User manual - Config System
Manual is about: 8-port 10/100 + 1-port 1000Base-T Copper
+ 1-port miniGBIC Gigabit Switch
of
126
Example usage:
To display the Switch’s information:
Figure 51. show switch command
config system
Purpose
Used to configure the auto log out timer of the
Switch.
Syntax
config system auto_logout < value 3 ~ 30 >
Description
This command is used to configure the auto log
out timer of the Switch.
Parameters
auto_logout
between 3 to 30. The telnet console will log out if
there is no user input for 3 to 30 minutes.
61