D-Link DES-2110 User manual - Enable Snmp Traps
Manual is about: 8-port 10/100 + 1-port 1000Base-T Copper
+ 1-port miniGBIC Gigabit Switch
of
126
Example usage:
To display the currently configured SNMP hosts on the Switch:
Figure 92. show snmp host command
enable snmp traps
Purpose
Used to enable SNMP trap support on the
Switch.
Syntax
enable snmp traps
Description
This command is used to enable SNMP trap
support on the Switch.
Parameters
None.
Example usage:
To enable SNMP trap support on the Switch:
100