D-Link DES-2110 User manual - Create Snmp Host
Manual is about: 8-port 10/100 + 1-port 1000Base-T Copper
+ 1-port miniGBIC Gigabit Switch
of
126
Purpose
Used to display SNMP community strings
configured on the Switch.
Syntax
show snmp community
Description
This command is used to display SNMP
community strings that are configured on the
Switch.
Example usage:
To display the currently entered SNMP community strings:
Figure 90. show snmp community command
create snmp host
Purpose
Used to create a recipient of SNMP traps
generated by the Switch’s SNMP agent.
Syntax
create snmp host
trap_community
Description
This command creates a recipient of SNMP traps
generated by the Switch’s SNMP agent
98