D-Link xStack DGS-3426 User Manual - page 114
xStack DGS-3400 Series Fast Ethernet Switch
Figure 7- 21. Instance ID Settings window – Add
The user may configure the following parameters to create a MSTI in the Switch.
Parameter
Description
MSTI ID
Enter a number between 1 and 15 to set a new MSTI on the Switch.
Type
Create is selected to create a new MSTI. No other choices are available for
this field when creating a new MSTI.
VID List (1-4094)
This field is used to specify the VID range from configured VLANs set on the
Switch. Supported VIDs on the Switch range from ID number 1 to 4094.
Click Apply to implement changes made.
To configure the settings for the CIST, click on its hyperlinked name in the Current MST Configuration Identification
window, which will reveal the following window to configure:
Figure 7- 22. Instance ID Settings window - CIST modify
The user may configure the following parameters to configure the CIST on the Switch.
Parameter
Description
MSTI ID
The MSTI ID of the CIST is 0 and cannot be altered.
Type
This field allows the user to choose a desired method for altering the MSTI
settings. The user has 2 choices.
Add VID - Select this parameter to add VIDs to the MSTI ID, in conjunction
with the VID List parameter.
Remove VID - Select this parameter to remove VIDs from the MSTI ID, in con-
junction with the VID List parameter.
VID List (1-4094)
This field is used to specify the VID range from configured VLANs set on the
Switch. Supported VIDs on the Switch range from ID number 1 to 4094. This
field is inoperable when configuring the CIST.
Click Apply to implement changes made.
103