D-Link xStack DGS-3426 User Manual - page 168
xStack DGS-3400 Series Fast Ethernet Switch
Successful login using any of these techniques will give the user a "User" privilege only. If the user wishes to upgrade his
or her status to the administrator level, the user must use the Enable Admin window, in which the user must enter a
previously configured password, set by the administrator. (See the Enable Admin part of this section for more detailed
information concerning the Enable Admin command.)
To view the following screen click Security Management > Access Authentication Control > Login Method Lists:
Figure 8- 15. Login Method List Settings window
The Switch contains one Method List that is set and cannot be removed, yet can be modified. To delete a Login Method
List defined by the user, click the
under the Delete heading corresponding to the entry desired to be deleted. To
modify a Login Method List, click on its hyperlinked Method List Name. To configure a new Method List, click the Add
button.
Both actions will result in the same screen to configure:
Figure 8- 16. Login Method List - Edit window (default)
Figure 8- 17. Login Method List – Add window
To define a Login Method List, set the following parameters and click Apply:
157