D-Link xStack DGS-3426 User Manual - page 74
xStack DGS-3400 Series Fast Ethernet Switch
Figure 6- 40. SNMP Community Table Configuration window
The following parameters can set:
Parameter
Description
Community Name
Type an alphanumeric string of up to 32 characters that is used to identify
members of an SNMP community. This string is used like a password to give
remote SNMP managers access to MIB objects in the Switch's SNMP agent.
View Name
Type an alphanumeric string of up to 32 characters that is used to identify the
group of MIB objects that a remote SNMP manager is allowed to access on
the Switch. The view name must exist in the SNMP View Table.
Access Right
Read Only - Specifies that SNMP community members using the community
string created can only read the contents of the MIBs on the Switch.
Read Write - Specifies that SNMP community members using the community
string created can read from, and write to the contents of the MIBs on the
Switch.
To implement the new settings, click Apply. To delete an entry from the SNMP Community Table, click the
under
the Delete heading, corresponding to the entry you wish to delete.
63