D-Link xStack DGS-3426 User Manual - File
xStack DGS-3400 Series Fast Ethernet Switch
File
•
Print Setup - will view the image to be printed.
•
Print Topology - will print the topology map.
•
Preference - will set display properties, such as polling interval, and the views to open at SIM startup.
Group
•
Add to group - add a candidate to a group. Clicking this option will reveal the following screen for the
user to enter a password for authentication from the Candidate Switch before being added to the SIM
group. Click OK to enter the password or Cancel to exit the window.
Figure 6- 63. Input password window.
•
Remove from Group - remove an MS from the group.
Device
•
Configure - will open the web manager for the specific device.
View
•
Refresh - update the views with the latest status.
•
Topology - display the Topology view.
Help
•
About - Will display the SIM information, including the current SIM version.
Single IP Management Firmware Upgrade
The Comander Switch may be used for firmware upgrades of emeber switches. To access the following window, click
Single IP Management > Firmware Upgrade. Member Switches will be listed in the table and will be specified by Port
(port on the CS where the MS resides), MAC Address, Model Name and Version. To specify a certain Switch for firm-
ware download, click its corresponding check box under the Port heading. To update the firmware, enter the Server IP
Address where the firmware resides and enter the Path/Filename of the firmware. Click Download to initiate the file
transfer.
Figure 6- 64. Single IP Management Firmware Upgrade menu
78