D-Link xStack DGS-3426 User Manual - System Severity Settings
xStack DGS-3400 Series Fast Ethernet Switch
System Severity Settings
The Switch can be configured to allow alerts be logged or sent as a trap to an SNMP agent or both. The level at which the
alert triggers either a log entry or a trap message can be set as well. Use the System Severity Settings menu to set the
criteria for alerts. The current settings are displayed below the Settings menu. In the Administration folder, click System
Severity Settings, to view the window shown below.
Figure 6- 12. System Severity Settings
Use the drop-down menus to configure the parameters described below.
Click Apply to implement the new System Severity Settings.
Parameter
Description
System Severity
Choose how the alerts are used from the drop-down menu. Select log to send
the alert of the Severity Type configured to the Switch’s log for analysis.
Choose trap to send it to an SNMP agent for analysis. Or select all to send the
chosen alert type to an SNMP agent and the Switch’s log for analysis.
Severity Level
Choose what level of alert will trigger sending the log entry or trap message as
defined by the Severity Name. Select critical to send only critical events to the
Switch’s log or SNMP agent. Choose warning to send critical and warning
events to the Switch’s log or SNMP agent. Select information send
informational, warning and critical events to the Switch’s log or SNMP agent.
41