D-Link xStack DGS-3426 User Manual - Static Ipv6 Route Settings
xStack DGS-3400 Series Fast Ethernet Switch
Static IPv6 Route Settings
A static entry of an IPv6 address can be entered into the Switch’s routing table for IPv6 formatted addresses. To view the
following window, click Administration > Routing Table > IPv6 Static Route.
Figure 6- 29. IPv6 Static Route Settings list
This window shows the following values:
Parameter
Description
IPv6 Address/Netmask
The IPv6 address and corresponding Subnet Mask of the IPv6 static route entry.
Gateway
The corresponding IPv6 address for the next hop Gateway address in IPv6 format.
Metric (1-65535)
The metric of the IPv6 interface entered into the table representing the number of
routers between the Switch and the IPv6 address above. Metric values allowed are
between 1-65535.
Protocol
Represents the status (default or static) for the IPv6 routing table entry.
Delete
Click the
button if you would like to delete this entry from the list.
55