D-Link xStack DGS-3426 User Manual - Web Pages
xStack DGS-3400 Series Fast Ethernet Switch
Web Pages
When connecting to the management mode of the Switch with a web browser, a login screen is displayed. Enter a user
name and password to access the Switch's management mode.
Below is a list of the main folders available in the web interface:
Adminstration – Contains the following menu pages and sub-directories: IP Address, Port Configuration, User
Accounts, Port Mirroring, System Log Settings, System Severity Settings, SNTP Settings, MAC Notification
Settings, TFTP Services, Multiple Image Services, Ping Test, Safeguard Engine, Static ARP Settings, Routing
Table, DHCP Auto Configuration, SNMP Manager, IP-MAC Binding and Single IP Management.
L2 Features – Contains the following menu pages and sub-directories: VLAN, Trunking, IGMP Snooping,
Spanning Tree and Forwarding & Filtering.
QoS – Contains the following menu pages and sub-directories: Bandwidth Control, QoS Output Scheduling,
802.1p Default Priority and 802.1p Uer Priority.
ACL – Contains the following menu pages and sub-directories: Access Profile Table and CPU Interface
Filtering.
Security – Contains the following menu pages and sub-directories: Traffic Control, Port Security, Port Lock
Entries, 802.1x, Trusted Host, Access Authentication Control, Traffic Segmentation, SSL and SSH.
Monitoring – Contains the following menu pages and sub-directories: Device Status, Module Information, CPU
Utilization, Port Utilization, Packets, Errors, Packet Size, Browse Router Port, VLAN Status, Port Access
Control, MAC Address Table, IGMP Snooping Group, Switch Log, Browse ARP Table, Browse IPv6 ARP Table
and Session Table.
Save Services – Contains the following menu pages and sub-directories: Save Changes, Configure
Information and Config Current Setting.
Reset, Reboot System and Logout menu links are displayed in the main directory.
NOTE: Be sure to configure the user name and password in the User
Accounts menu before connecting the Switch to the greater network.
29