D-Link xStack DGS-3426 User Manual - page 144
xStack DGS-3400 Series Fast Ethernet Switch
Parameter
Description
Profile ID (1-5)
Type in a unique identifier number for this profile set. This value can be set from
1 - 5.
Type
Select profile based on Ethernet (MAC Address), IP address or packet content
mask. This will change the menu according to the requirements for the type of
profile.
Select Ethernet to instruct the Switch to examine the layer 2 part of each packet
header.
Select IP to instruct the Switch to examine the IP address in each frame's header.
Select Packet Content Mask to specify a mask to hide the content of the packet
header.
VLAN
Selecting this option instructs the Switch to examine the VLAN identifier of each
packet header and use this as the full or partial criterion for forwarding.
Source MAC
Source MAC Mask - Enter a MAC address mask for the source MAC address.
Destination MAC
Destination MAC Mask - Enter a MAC address mask for the destination MAC
address.
Ethernet type
Selecting this option instructs the Switch to examine the Ethernet type value in
each frame's header.
Click Apply to set this entry in the Switch’s memory.
The page shown below is the IP Access Profile Configuration page.
Figure 7- 56. CPU Interface Filtering Configuration window- IP
133