D-Link xStack DGS-3426 User Manual - page 115
xStack DGS-3400 Series Fast Ethernet Switch
To configure the parameters for a previously set MSTI, click on its hyperlinked MSTI IDnumber, which will reveal the
following window for configuration.
Figure 7- 23. Instance ID Settings window – modify
The user may configure the following parameters for a MSTI on the Switch.
Parameter
Description
MSTI ID
Displays the MSTI ID previously set by the user.
Type
This field allows the user to choose a desired method for altering the MSTI
settings. The user has four choices.
Add - Select this parameter to add VIDs to the MSTI ID, in conjunction with the
VID List parameter.
Remove - Select this parameter to remove VIDs from the MSTI ID, in con-
junction with the VID List parameter.
VID List (1-4094)
This field is used to specify the VID range from configured VLANs set on the
Switch that the user wishes to add to this MSTI ID. Supported VIDs on the
Switch range from ID number 1 to 4094. This parameter can only be utilized if
the Type chosen is Add or Remove.
Click Apply to implement changes made.
104