D-Link xStack DGS-3426 User Manual - page 65
xStack DGS-3400 Series Fast Ethernet Switch
To enter an IP Interface into the Switch’s Static/Default Route Settings window, click the Add button, revealing the
following window to configure.
Figure 6- 28. Static/Default Route Settings – Add window
The following fields can be set:
Parameter
Description
IP Address
Allows the entry of an IP address that will be a static entry into the Switch’s Routing
Table.
Subnet Mask
Allows the entry of a subnet mask corresponding to the IP address above.
Gateway
Allows the entry of an IP address of a gateway for the IP address above.
Metric (1-65535)
Allows the entry of a routing protocol metric representing the number of routers
between the Switch and the IP address above.
Backup State
The user may choose between Primary and Backup. If the Primary Static/Default
Route fails, the Backup Route will support the entry. Please take note that the
Primary and Backup entries cannot have the same Gateway.
Click Apply to implement changes made.
54