D-Link xStack DGS-3426 User Manual - Sntp Settings
xStack DGS-3400 Series Fast Ethernet Switch
SNTP Settings
Time Settings
To configure the time
settings for the Switch, open
the Administration folder.
Then the SNTP Settings
folder and click on the Time
Settings link, revealing the
following window for the
user to configure.
Figure 6- 13. Current Time: Status window
The following parameters can be set or are displayed:
Parameter
Description
Current Time: Status
System Boot Time
Displays the time when the Switch was initially started for this session.
Current Time
Displays the Current Time.
Time Source
Displays the time source for the system.
Current Time: SNTP Settings
SNTP State
Use this pull-down menu to Enabled or Disabled SNTP.
SNTP Primary Server This is the IP address of the primary server the SNTP information will be taken from.
SNTP Secondary
Server
This is the IP address of the secondary server the SNTP information will be taken from.
SNTP Poll Interval in
Seconds (30-99999)
This is the interval, in seconds, between requests for updated SNTP information.
Current Time: Set Current Time
Year
Enter the current year, if you want to update the system clock.
Month
Enter the current month, if you would like to update the system clock.
Day
Enter the current day, if you would like to update the system clock.
Time in HH MM SS
Enter the current time in hours, minutes, and seconds.
Click Apply to implement your changes.
42