D-Link xStack DGS-3426 User Manual - Gvrp Setting
Manual is about: DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch
of
246
xStack DGS-3400 Series Fast Ethernet Switch
GVRP Setting
In the Administration menu, open the VLAN folder and click GVRP Settings.The 802.1Q Port Settings window,
shown below, allows you to determine whether the Switch will share its VLAN configuration information with other
GARP VLAN Registration Protocol (GVRP) enabled switches. In addition, Ingress Checking can be used to limit traffic by
filtering incoming packets whose PVID does not match the PVID of the port. Results can be seen in the table under the
configuration settings, as seen below.
Figure 7- 7. 802.1Q Port Settings window
Click Apply to implement changes made. See table below for description of parameters.
88