D-Link xStack DGS-3600 Series User Manual - Forwarding
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Forwarding
Unicast Forwarding
The following figure and table describe how to set up
Multicast Forwarding
on the Switch. Open the
Forwarding & Filtering
folder in the
L2 Features
menu and click on the
Unicast Forwarding
link.
Figure 7- 37. Unicast Forwarding Table window
To add or edit an entry, define the following parameters and then click
Add
:
Parameter Description
VLAN ID (VID)
The VLAN ID number of the VLAN on which the above Unicast MAC address resides.
MAC Address
The MAC address to which packets will be statically forwarded. This must be a unicast MAC
address.
Port
Allows the selection of the port number on which the MAC address entered above resides.
To delete an entry in the
Unicast Forwarding Table
, click the corresponding
under the Delete
heading.
Multicast Forwarding
The following figure and table describe how to set up
Multicast Forwarding
on the Switch. Open the
Forwarding & Filtering
folder located in
L2 Features
, and click on the
Multicast Forwarding
link to see the entry screen below:
Figure 7- 38. Static Multicast Forwarding Settings window
The
Static Multicast Forwarding Settings
window displays all of the entries made into the Switch's static multicast forwarding
table. Click the
Add
button to open the
Setup Static Multicast Forwarding Table
window, as shown below:
107