D-Link xStack DGS-3600 Series User Manual - Web Pages
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Web Pages
When you connect to the management mode of the Switch with a web browser, a login window is displayed. Enter a user name
and password to access the Switch's management mode.
Below is a list and description of the main folders available in the web interface:
Administration
– Contains windows concerning configuring the basic functions of the Switch, including Device Information, IP
Address, Port Configuration, User Accounts, Port Mirroring, System Log Settings, System Severity Settings, SNTP Settings,
MAC Notification Settings, TFTP Services, File System Services, Ping Test, DHCP Auto Configuration, Time Range, SNMP
Manager, IP MAC Binding and Single IP Management Settings.
Layer 2 Features
– Contains windows concerning Layer 2 features of the Switch, including VLAN, Trunking, IGMP Snooping,
MLD Snooping, Spanning Tree and Forwarding & Filtering.
Layer 3 Features
– A discussion of Layer 3 features of the Switch, including IP Interface Settings, MD5 Key Settings, Route
Redistribution Settings, Static/Default Route Settings, Route Preference Settings, Policy Route Settings, Static ARP Settings,
Routing Table, RIP, OSPF, DCHP/BOOTP Relay, DNS Relay, VRRP and IP Multicast Routing Protocol.
QoS
– Contains windows concerning Bandwidth Control, QoS Scheduling Mechanism, QoS Output Scheduling, 802.1p Default
Priority and 802.1p User Priority.
ACL
– Contains the window for the Access Profile Table and CPU Interface Filtering.
Security
– Contains windows for Traffic Control, Port Security, Port Lock Entries, 802.1X, Trusted Host, Access Authentication
Control, Safeguard Engine, Traffic Segmentation, SSL and SSH.
Monitoring
– Contains windows for Device Status, Module Information, CPU Utilization, Port Utilization, Packets, Errors,
Packet Size, Browse Router Port, Browse MLD Router Port, VLAN Status, Port Access Control, MAC Address Table, IGMP
Snooping Group, MLS Snooping Group, Trace Route, IGMP Snooping Forwarding, IP Forwarding Table, Browse Routing Table,
Browse ARP Table, Browse IP Multicast Forwarding Table, Browse IP Multicast Interface Table, Browse IGMP Group Table,
DVMRP Monitor, PIM Monitor, OSPF Monitor, Switch Log, Browse ARP Table, Browse IPv6 ARP Table and Session Table.
Switch Maintenance
– Contains information regarding Reset System, Reboot, Logout and Save Services.
NOTE:
Be sure to configure the user name and password in the User
Accounts menu before connecting the Switch to the greater network.
24