D-Link xStack DGS-3600 Series User Manual - Logout
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Current Configuration Settings
The
Configuration Settings
window allows users to manipulate configuration images saved in the Flash memory of the Switch.
To access the following window, click
Save Services > Configuration Settings
.
Figure 13- 5. Configuration Settings window
This window offers the following information:
Parameter
Description
Configuration File
Enter the configuration file located on the Flash drive to be altered.
Action
This field has two options for configuration.
Boot_up
– Select this option to set the configuration file specified above as the boot
up configuration for the Switch. This saved configuration will be set as the boot up
file after a switch reboot has been performed. The default setting has configuration
file C:/STARTUP.CFG as the boot up configuration file for the Switch unless
specified here.
•
•
Active
- Choosing this parameter will first load and then activate this configuration
file on the Switch.
Click
Apply
to implement changes made.
Logout
Use the Logout page to logout of the Switch's Web-based management agent by clicking on the
Log Out
button.
Figure 13- 6. Logout Web Setup window
276