D-Link xStack DGS-3600 Series User Manual - Rear Panel Description
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Rear Panel Description
The rear panels of the DGS-3627, DGS-3627G and the DGS-3650 are described below.
DGS-3627 and DGS-3627G
The rear panel of DGS-3627 and DGS-3627G contains an AC power connector, an outlet for an optional external RPS and three
slots for additional 10GE optional modules.
Figure 1- 7. Rear panel view of the DGS-3627(G)
DGS-3650
The rear panel of DGS-3650 contains an AC power connector, an outlet for an optional external RPS, a DCE RS-232 console port
and two slots for additional 10GE optional modules.
Figure 1- 8. Rear Panel view of DGS-3650
The rear panel includes an outlet for an optional external redundant power supply. When power fails, the optional external RPS
will take over all the power immediately and automatically. The AC power connector is a standard three-pronged connector that
supports the power cord. Plug-in the female connector of the provided power cord into this socket, and the male side of the cord
into a power outlet. The Switch automatically adjusts its power setting to any supply voltage in the range from 100 ~ 240 VAC at
50 ~ 60 Hz.
4