D-Link xStack DGS-3600 Series User Manual - Port Utilization
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Parameter
Description
Time Interval
Select the desired setting between
1s
and
60s
, where "s" stands for seconds. The default
value is one second.
Record Number
Select number of times the Switch will be polled between
20
and
200
. The default value is
200
.
Show/Hide
These check boxes allow the user to choose the CPU utilization over increments of
Five
Secs
,
One Min
and
Five Min
. Each time increment will be displayed in the window as a
specifically colored line. Five seconds will be displayed as yellow, one minute as blue and
five minutes as pink.
Port Utilization
The
Utilization
window displays the percentage of the total available bandwidth being used on the port. To view the port
utilization, open the
Monitoring
folder and then the
Port Utilization
link:
Figure 12- 4. Port Utilization window
Select a Port number from the drop down menu and click
Apply
to display the Port Utilization for a particular port. The following
fields can be set:
Parameter Description
Time Interval
Select the desired setting between
1s
and
60s
, where "s" stands for seconds. The default
value is one second.
Record Number
Select number of times the Switch will be polled between
20
and
200
. The default value is
200
.
Click
Clear
to refresh the graph. Click
Apply
to set changes implemented.
239