D-Link xStack DGS-3600 Series User Manual - Authentication Server Group
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Parameter Description
Application
Lists the configuration applications on the Switch. The user may configure the Login Method
List and Enable Method List for authentication for users utilizing the Console (Command
Line Interface) application, the Telnet application, SSH and the WEB (HTTP) application.
Login Method List
Using the pull down menu, configure an application for normal login on the user level,
utilizing a previously configured method list. The user may use the default Method List or
other Method List configured by the user. See the
Login Method Lists
window, in this
section, for more information.
Enable Method List
Using the pull down menu, configure an application for normal login on the user level,
utilizing a previously configured method list. The user may use the default Method List or
other Method List configured by the user. See the
Enable Method Lists
window, in this
section, for more information
Click
Apply
to implement changes made.
Authentication Server Group
This window will allow users to set up
Authentication Server Groups
on the Switch. A server group is a technique used to group
TACACS/XTACACS/TACACS+/RADIUS server hosts into user-defined categories for authentication using method lists. The
user may define the type of server group by protocol or by previously defined server group. The Switch has three built-in
Authentication Server Groups that cannot be removed but can be modified. Up to eight authentications server hosts may be added
to any particular group.
To view the following window, click
Security > Access Authentication Control > Authentication Server Group
:
Figure 11- 25. Authentication Server Group Settings window
This screen displays the Authentication Server Groups on the Switch. The Switch has four built-in Authentication Server Groups
that cannot be removed but can be modified. To modify a particular group, click its hyperlinked Group Name, which will then
display the following window.
Figure 11- 26. Add a Server Host to Server Group (radius) window
To add an Authentication Server Host to the list, enter its IP address in the IP Address field, choose the protocol associated with
the IP address of the Authentication Server Host and click
Add to Group
to add this Authentication Server Host to the group.
220