D-Link xStack DGS-3600 Series User Manual - Multicast Filtering Mode

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch 

Figure 7- 39.  Setup Static Multicast Forwarding Table window 

The following parameters can be set: 

Parameter              Description 

VID 

The VLAN ID of the VLAN to which the corresponding MAC address belongs. 

Multicast MAC 

Address 

The MAC address of the static source of multicast packets. This must be a multicast MAC 

address. 

Port Settings 

Allows the selection of ports that will be members of the static multicast group and ports that are 

either forbidden from joining dynamically, or that can join the multicast group dynamically, using 

GMRP. The options are: 

None

 - No restrictions on the port dynamically joining the multicast group. When None is chosen, 

the port will not be a member of the Static Multicast Group. 

Egress 

- The port is a static member of the multicast group. 

Click 

Apply

 to implement the changes made. To delete an entry in the

 Static Multicast Forwarding Table

, click the 

corresponding   under the Delete heading. Click the 

Show All Multicast Forwarding Entries

 link to return to the 

Static 

Multicast Forwarding Settings 

window. 

Multicast Filtering Mode 

Open the 

Forwarding & Filtering

 folder and click on the 

Multicast Filtering Mode 

link to see the entry screen below: 

Figure 7- 40. Multicast Filtering Mode 

108