D-Link xStack DGS-3600 Series User Manual - Browse Igmp Group Table
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
269
Browse IGMP Group Table
Figure 12- 36. Browse IGMP Group Table
DVMRP Monitoring
This menu allows the
DVMRP
(Distance-Vector Multicast Routing Protocol) to be monitored for each IP interface defined on the
Switch. This folder, found in the
Monitoring
folder, offers 4 screens for monitoring:
Browse DVMRP Routing Table
,
Browse
DVMRP Neighbor Address Table
,
Browse DVMRP Routing Next Hop Table
and
Browse PIM Neighbor Table
.
Browse DVMRP Routing Table
7
Figure 12- 3 . DVMRP Routing Table
Browse DVMRP Neighbor Table
Figure 12- 38. DVMRP Neighbor Table
Browse DVMRP Routing Next Hop Table
The
Browse IGMP Group Table
window
may be found in the
Monitoring
menu. This
window will show current IGMP group entries
on the Switch. To search a specific IGMP
group entry, enter an interface name into the
Interface Name
field or a
Multicast Group
IP address and click
Find
.
Multicast routing information is gathered an
Figure 12- 39. DVMRP Routing Next Hop Table
t
a
d
stored by DVMRP in the
DVMRP Routing
Table
, which may be found in the
Monitoring
folder under
Browse
DVMRP Monitoring
,
contains one row for each port in a DVMRP
mode. Each routing entry contains information
about the source and multicast group, and
incoming and outgoing interfaces. You may
define your search by entering a
Source IP
Address
and its subnet mask into the fields a
the top of the page, and click
Browse
.
This table, found in the
Monitoring
menu under
DVMRP Monitor > Browse DVMRP Neighbor
Table
contains information about DVMRP
neighbors of the Switch. To search this table, enter
either an
Interface Name
or
Neighbor Address
into the respective field
and click the
Find
button.
DVMRP neighbors of that entry will appear in the
DVMRP Neighbor Table
below.
The
DVMRP Routing Next Hop Table
contains
information regarding the next-hop for forwarding
multicast packets on outgoing interfaces. Each
entry in the
DVMRP Routing Next Hop Table
refers to the next-hop of a specific source to a
specific multicast group address. This table is
found in the
Monitoring
menu under
DVMRP
Monitoring,
with the heading
Browse DVMRP
Routing Next Hop Table.
To search this table,
enter either an
Interface Name
or
Source IP
Address
into the respective field
nd click the
Find
button. The next hop of that DVMRP
Routing entry will appear in the
DVMRP Routing
Next Hop Table
below.