E.H. Wachs 08-051-MAN User Manual - page 10
Manual is about: Subsea Wire Saw
of
84
Subsea Wire Saw User’s Manual
6
Part No. 08-051-MAN, Rev. 1-0709
E.H. Wachs
Figure 1-3. The feed system components are shown.
The feed block is attached to the saw bow.
The top of the feed screw has a drive nut to allow the feed to
be operated manually, and a clutch in the top coupling dis-
engages the feed screw if the feed drive jams or reaches the
end of travel.
Figure 1-4. Use the manual feed nut to move the saw
bow if it cannot be operated using hydraulic power.
Turn the nut clockwise to retract the bow away from
the workpiece.
Feed block
Feed screw
Feed motor
Drive chain
Manual feed nut
Manual
feed nut