E.H. Wachs 08-051-MAN User Manual - page 40
Manual is about: Subsea Wire Saw
of
84
Subsea Wire Saw User’s Manual
36
Part No. 08-051-MAN, Rev. 1-0709
E.H. Wachs
Figure 3-19. Push the feed speed knob down to the
maximum setting.
It will take about 30 minutes
to retract the feed drive on a
36 inch pipe.
4.
When the saw bow is back at its home position, pull
the feed flow lever up to stop the feed drive.
Figure 3-20. Pull the feed flow lever up to turn off the
feed drive.
5.
Rig the shackles to the overhead lift. Lift just enough
to put tension on the chains and secure the machine.
6.
Push the clamping direction knob to the RETRACT
position.
NOTE