E.H. Wachs 08-051-MAN User Manual - page 50
Manual is about: Subsea Wire Saw
of
84
Subsea Wire Saw User’s Manual
46
Part No. 08-051-MAN, Rev. 1-0709
E.H. Wachs
6.
Place the new liner on the wheel and press it down
into place.
Figure 4-13. Put the new wheel liner on the wheel.
7.
If you removed the shaft, replace it through the center
of the wheel.
Figure 4-14. Replace the shaft through the center of
the wheel.
8.
Replace the side plate, making sure that the keys in the
shaft fit into the slots in plate.