E.H. Wachs 08-051-MAN User Manual - page 51
Manual is about: Subsea Wire Saw
of
84
Chapter 4, Maintenance: Replacing the Wheel Liners
E.H. Wachs
Part No. 08-051-MAN, Rev. 1-0709
47
Figure 4-15. Make sure the shaft keys are in the slots
on both side plates of the wheel.
9.
Fasten the side plate with the 6 screws. Snug each
screw, then tighten them in a criss-cross pattern to
secure the wheel evenly.
Figure 4-16. Replace the screws in the side plate.
10.
Replace the wheel into its mounting fixture. Put the
bolt through the top of the fixture, and install the nut
on the bottom. Tighten the nut securely.