E.H. Wachs 08-051-MAN User Manual - page 15
Chapter 1, About the Subsea Wire Saw: Equipment Description
E.H. Wachs
Part No. 08-051-MAN, Rev. 1-0709
11
Lifting for Horizontal Cut
With the machine positioned horizontal on the floor or deck,
attach a lift to the two hooks on the lift bar and the front
hook on top of the frame.
Figure 1-12. To position the machine horizontally on
the pipe, attach to the two lift bar hooks and the front
hook on the top.
Storing the Machine
Store the machine sitting horizontal with the front of it (the
side with the Wachs logo) facing up. For long-term storage,
clean and dry the machine thoroughly, then cover it with a
waterproof cover.
You can leave the wire installed on the machine during stor-
age. Keep a normal amount of tension on the wire to hold it
in place.