E.H. Wachs 08-051-MAN User Manual - page 31
Manual is about: Subsea Wire Saw
of
84
Chapter 3, Operating Instructions: Setting the Clamp Arms for the Pipe Size
E.H. Wachs
Part No. 08-051-MAN, Rev. 1-0709
27
Figure 3-6. The photo shows the size stamps on the
WS-3616 model. The pin is in the 16-20” position.
WS-5230 Pipe Size Settings
Table 3 and Figure 3-7 describe the pipe size settings for the
WS-5230 model.
Table 2: Pipe Size Ranges for Clamping
Arm Positions—WS-3616
Size Stamp
Pipe Diameter Range
20
16” to 20” (406-508 mm)
24
20” to 24” (508-610 mm)
28
24” to 28” (610-711 mm)
32
28” to 32” (711-813 mm)
36
32” to 36” (813-914 mm)
Table 3: Pipe Size Ranges for Clamping
Arm Positions—WS-5230
Size Stamp
Pipe Diameter Range
34
30” to 34” (762-864 mm)
40
34” to 40” (864-1016 mm)
46
40” to 46” (1016-1168 mm)
52
46” to 52” (1168-1321 mm)