E.H. Wachs 08-051-MAN User Manual - page 38
Manual is about: Subsea Wire Saw
of
84
Subsea Wire Saw User’s Manual
34
Part No. 08-051-MAN, Rev. 1-0709
E.H. Wachs
Figure 3-15. Push the feed flow lever up to 0 and pull
the feed flow lever up to turn off the feed drive.
11.
Pull the cutter flow lever up to turn off the cutter drive.
Figure 3-16. Pull the cutter flow lever up to turn off
the cutter.
R
EMOVING
THE
M
ACHINE
1.
Set the feed direction knob on the TCP to REVERSE.