E.H. Wachs 08-051-MAN User Manual - Chapter 4
Manual is about: Subsea Wire Saw
of
84
Chapter 4, Maintenance
E.H. Wachs
Part No. 08-051-MAN, Rev. 1-0709
39
Chapter 4
Maintenance
L
UBRICATION
Every time you use the machine, lubricate the following
components.
1.
Slowly pump multi-purpose No. 2 EP marine grease
into the grease fittings on each of the 4 wheel hubs.
(Do NOT use AquaLube on the wheel hubs.)
Figure 4-1. Each wheel hub has a grease fitting.
Do not directly apply lubricant
to the feed screw.
2.
Pump AquaLube into the grease fittings on the feed
gears, feed motor, and feed block (4 fittings).
CAUTION
In This Chapter
L
UBRICATION
R
EPLACING
THE
C
UTTING
W
IRE
R
EPLACING
THE
M
OUNTING
S
HOES
R
EPLACING
THE
W
HEEL
L
INERS