E.H. Wachs 08-051-MAN User Manual - page 39
Manual is about: Subsea Wire Saw
of
84
Chapter 3, Operating Instructions: Removing the Machine
E.H. Wachs
Part No. 08-051-MAN, Rev. 1-0709
35
Figure 3-17. Set the feed direction knob to REVERSE.
2.
Push the feed flow lever down to open the feed circuit.
Figure 3-18. Push the feed flow lever down to supply
power to the feed drive.
3.
Push the feed speed knob down to 6.5 gpm (maximum
flow).