Jablotron JA-63 „PROFI“ Installation Manual - page 29
JA-63 „PROFI“ Alarm System
- 29 -
MGK51404
21 Possibilities to extend the system
21.1 Extension of the system with a subsystem
An additional JA-6x control panel can be enrolled as a subsystem to the control panel (see 10.10.). Each system then
can be operated either as an independent system, or the main control panel can arm and disarm the sub-control panel.
Any event in the subsystem (alarm, tampering, failure or low battery) will trigger the same kind of event on the main
control panel (the main control panel will display "J" as the event source). The main control panel will not indicate the
number of the item which triggered the event, but this information is available on the subsystem’s control panel.
Using this method, multiple level subsystems can be chained.
Warning: never enroll the top level control panel as a subsystem of the lower level control panel. This would create endless circle for
the data and such an alarm system chain would not work properly.
21.2 Brief overview of parts suitable for the JA-63 system
The following description includes the basic assortment of accessories. Jablotron is systematically introducing new and improved
items to the market. You can get the most current information from your distributor or you can visit Jablotron’s Internet home page at:
www.jablotron.com
21.3 Wireless items - can be used with a wireless version
JA-60N Magnetic door detector - is equipped with a magnet. Movement of the magnet triggers the internal sensor in
the detector. It can trigger an Instant or Delayed intruder alarm and it also has built in tamper detectors. There are inputs
for external sensors. It is powered with two AAA batteries, battery life time 1 year, radio communication distance 100m,
designed for indoor use.
JA-60P PIR motion detector - triggers an Instant or Delayed intruder alarm when the movement of a human body is
detected. It has built in tampering sensors and it uses digital processing of the signal for a high false alarm immunity.
Coverage 12m/120°. Optional lenses (long corridor, pet zone) are available for this detector. It is powered with two AAA
batteries, battery life time 1 year, radio communication distance 100m, designed for indoor use.
JA-60B Wireless glass break detector - its sensor covers an entire room (up to 9m), regardless of the number of
windows. A dual technology detection method (air pressure and sound analysis) is combined with digital processing to
guarantee high sensitivity to the breaking of all types of glass (Plate, Tempered, Laminated, Wired). It is powered with
two AAA batteries, battery life time 1 year, radio communication distance 100m, designed for indoor use.
JA-60S Smoke detector - triggers a Fire alarm when smoke is detected. It also has a built in siren. A built in ionic
chamber ensures high stability of the sensor. It is powered with two AA batteries, battery life time 1 year, radio
communication distance 100m, designed for indoor use.
JA-60G Gas leak detector - triggers a Fire alarm when any combustible gas is detected (natural gas, city gas, propane,
butane etc.). The detector is powered directly form the AC power network and it wirelessly transmits information to the
control panel. The JA-60G has a built in siren and an output relay. The relay, for example, can be wired to an electrical
valve to turn off the gas supply when a leak is detected. Radio communication distance 50m. Designed for indoor use.
RC-11 Remote control - this key chain tag sized controller can Arm and Disarm the system. It can also trigger a silent
Panic alarm. It is powered by a 6V battery and its working range is up to 30 meters. The RC-11 can also be used
separately to control UC receiving modules directly (pulse, latch or ON and OFF modes).
RC-22 Panic button - is a large size button, which can be easily attached to a selected location (under a desk, on the
wall etc.). This button can be used to trigger a silent Panic alarm. The RC-22 can be enrolled to the control panel the
same way as the RC-11 remote control.It has a working range up to 100 meters.The RC-22 can also be used separately
to control UC receiving modules directly (pulse, latch or ON and OFF modes).
RC-60 Remote control – has two input terminals (A and B) and the tamper input. It can be used to arm and disarm the
system remotely from any device providing switching contact output (for example a key operated switch). The RC-60 is
powered with two AAA batteries.
JA-60D Wireless control keypad - can operate the system in a similar way as the system keypad (arming, disarming,
no code arming, partial arming, door opening and under duress operation). It has its own Master code and one User
code, which can be programmed independently from the control panel’s codes. If the system is split, the keypad can be
addressed to section A or B. It is powered with two AAA batteries, battery life time 1 year, radio communication distance
100m, designed for indoor use.
JA-60F Wireless keypad - can operate system in exactly the same way as the JA-60E wired keypad. It can also be used
for programming and testing of the system. The alarm system's status is indicated by the LED indicators, the built in LED
display and buzzer. Illuminated keys can be covered with a bottom - hinged cover. The keypad has TWO-WAY
communication with the control panel and it can be enrolled as a controller (positions c1 to c8). Multiple JA-60F keypads
can be enrolled to a single control panel. It is powered with four AAA batteries, battery life time 1 year, radio
communication distance (open area, no interference) is about 40 meters, indoors the distance from the control panel
should not exceed 30 meters. As an option the keypad can also be powered by a DC adapter (the keys are permanently
illuminated in this case).